Download this file :
This is direct link, no redirect link or commercial pop up ads!
- ANF
- Unlocked_Bootloader.zip
- edited files to be replaced
- twrp Kenzo_V6.3.17_boot.zip
- Fastboot ROM 7.17
- ROM MIUI EU 7.2 : MIUI 7.2.20.LCHONDA
1. Download all above file and then move to your computer and move in EU ROM to external memory or OTG (folder “Firmwere-update” you first need to delete contained in the EU’s rom. MANDATORY) and then enable USB debugging mode on redmi note 3 PRO and must tick OEM UNLOCK
2. Extract anf.zip then run the CMD file in the folder anf.zip have you extracted earlier
3. When the command prompt window appears then connect Xiaomi redmi note 3 pro you to the computer using the USB cable that previously enabled USB Debugging mode.
4. If pop up in redmi note 3 PRO you, check always remember and press ok
5. open the CMD of the folder that you extracted earlier anf then type the command adb devices
6. If you have terdetekasi redmi note 3 pro you, please go type the command adb reboot EDL
7. Automatically redmi note 3 pro you will reboot into EDL mode are marked by flashing red LED lights berarna fast kayak Ultraman lights are again dying fighting monsters.
8. unlock bootloader.zip extract files and edit files replace you take over
9. The extract also fastboot rom v7.1.7 of the above materials
10. Replace or replace all the files in the folder unlock the bootloader and replace edit files you’ve extracted earlier with existing files in the fastboot folder rom v7.1.7
11. If so, install Miflash you take the material above and run
12. Click browse and navigate to where you put the rom that is already in the replace / replace the file earlier
13. and press refresh
14. Then will appear the device list you marked with COMx
15. then press the flash on miflash (bottom “flash all, falsh all except storage, and flash all except the data and storage leave unchecked)
16. The process of flashing will run, wait, it is rather old
17. Once finished flashing, DONT TURN ON YOU’R PHONE OR YOU PHONE WILL BE BOOTLOP
18. Straight into fastboot mode (press and atah power button + volume down)
19. Upon entry into fastboot mode in the folder reopen CMD anf
20. Type the command fastboot oem device-info and enter
21. See section bootloadernya device is still false
22. Continue typing the command fastboot oem unlock-go and enter it automatically bootloader redmi note 3 pro you will instantly unlock
23. Still in fastboot mode, you unplug the USB cable from the computer and connect it again
24. Then extract the files and run Twrp3.bat Kenzo_V6.3.17_boot.zip
25. The window will display the command prompt, and then press enter only jia and follow the instructions in the CMD until redmi note 3 pro mode you enter TWRP26. Once installed TWRP, then fully redmi note 3 PRO you will bootloop immortal .. but quiet, immediately do the flashing using rom Xaiomi EU already you move it to the sd card in advance (via OTG can juag)
27. Tap on twrp install and navigate to rom Xiaomi EU
28. swipe to the right and then flash
29. Wait until finished
30. after completion, please reboot your pro redmi note 3
31. Voilaaa
Xiaomi redmi note 3 PRO you’ve unlocked bootloader + + installed TWRP custom-made ROM EU anyway
Note:
– Perform this tutorial on Windows 64bit (admin use Windows 7 64bit)
– To change discussed twrp MANDARIN into english please press box number 2 upwards from the bottom right
– If it turns out bootloop, sialhkan follow tutorial potent here (already admin own test and successfully)
– If you take the fastboot rom v7.1.8.0 or v7.2.5.0 can ignore edit replace files that you download in step no. 10