Complete tutorial to unlock bootloader you realme phone without the indeept test APK.
For other realme type, you need to flash the vbmeta disabler
For this time only work for Realme UI 1.0 (Android 10), so make sure use the custom recovery and and custom ROM that work on Realme UI 1.0 (Android 10)
Tested on Realme 3/ 3i. Should also work for Realme C11/ C12/ C15, Realme 5/ 5i/ 5s, Realme C3/ Narzo 10A, Realme Narzo 20/ 30A Mediatek version.
If your stock firmware Realme UI 2.0 (Android 11) you need to rollback (downgrade) to Realme UI 1.0 (Android 10), just folow this tutorial you only need to change the stock ROM.
Prerequisite
- Use at your own risk! I am not responsible for your actions
- I will try to keep update this page
- Make sure use the latest stock firmware
- Take IMEI Backup !! Store backup on pc/sdcard (nvram, nvdata, nvcfcg for mediatek and EFS for snapdragon)
Video Tutorial
File Needed
- ADB & Fastboot platform-tools
- Mediatek USB Driver
- libusb driver
- UsbDk Driver
- Bypass Apps (Dolphin Tool)
- SP_Flash_Tool_v5.1924_Win
For Realme 3/ 3i/ 3s
- Scatter file (Realme3/ 3i)
- Custom Recovery & Custom ROM
- No Need Rollback, it stuck on Realme ui 1 Android 10
For Realme C11/ C12/ C15/ C20/ C21 (Mediatek Version)
For Realme 5/ 5i/ 5s
For Realme C3/ Narzo 10A
- Scatter File For Realme C3/ Narzo 10A
- Custom Recovery & Custom ROM
- Rollback File (Downgrade)
- VBmeta_disabler (unified RUI1 & RUI2)
For Realme Narzo 20/ 30A/ 7i EU
- Scatter File Realme Narzo 20/ 30A/ 7i EU
- Custom Recovery & Custom ROM
- Rollback File (Downgrade)
Instruction To Bypass UBL & Disable AUth
- Install LibUsb Driver
- Disable WIndows Defender
- Enable OEM
- Turn off phone
- Open Dolphin tools
- Select Unlock Bootloader
- Press vol up + down > Plug usb cable
Instruction Flash Custom Recovery & Custom ROM
- Open scatter file
- OPen SP Flash Tools
- Setup Connection UART > Baud Rate
- DA : Standa MTK-AllinONE
- Scatter : Select scatter
- ctrl + al + V
- Window > Write Memory
- File Patch select custom Recovery
- Begin Address (HEX) RUI1 >> 0x108000
- Press Write Memory > Done
- Boot Into Custom Recovery > Power + vol down
- wipe/advance wipe select dalvic, cache, data, system
- Flash Custom ROM
- FOrmat Data
- Reboot